Publications in OpenAlex of which a co-author is affiliated to this organization
All publications | By field | By subfield
All publications [Next]
| Title | DOI |
|---|---|
| https://doi.org/10.5006/1.3280481 | Short-Term Deterioration of Polymer-Coated 55% Al-Zn – Part 1: Behavior of Thin Polymer Films |
| https://doi.org/10.1016/j.msec.2012.07.016 | Nanostructured β-phase Ti–31.0Fe–9.0Sn and sub-μm structured Ti–39.3Nb–13.3Zr–10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances |
| https://doi.org/10.1016/j.jmbbm.2011.05.028 | Enhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass |
| https://doi.org/10.1007/s10704-019-00361-1 | The third Sandia fracture challenge: predictions of ductile fracture in additively manufactured metal |
| https://doi.org/10.1016/j.electacta.2019.06.161 | Influence of water content and applied potential on the electrodeposition of Ni coatings from deep eutectic solvents |
| https://doi.org/10.1016/j.simpat.2022.102664 | Numerical prediction of microstructure and hardness for low carbon steel wire Arc additive manufacturing components |
| https://doi.org/10.1108/jmtm-06-2022-0235 | Assessing the impact of fusion-based additive manufacturing technologies on green supply chain management performance |
| https://doi.org/10.1002/jps.24531 | In-Line Monitoring of a Pharmaceutical Pan Coating Process by Optical Coherence Tomography |
| https://doi.org/10.1016/j.msea.2022.144313 | The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels |
| https://doi.org/10.1016/j.fusengdes.2021.112645 | Technological aspects in blanket design: Effects of micro-alloying and thermo-mechanical treatments of EUROFER97 type steels after neutron irradiation |
| https://doi.org/10.1016/j.nme.2021.101070 | Development of RAFM steel for nuclear applications with reduced manganese, silicon and carbon content |
| https://doi.org/10.1016/s0921-5093(97)00455-3 | γ-Fibre recrystallization texture in IF-steel: an investigation on the recrystallization mechanisms |
| https://doi.org/10.1007/s11661-002-0026-4 | Flow stress and ductility of duplex stainless steel during high-temperature torsion deformation |
| Short-Term Deterioration of Polymer-Coated 55% Al-Zn Part 1 : Behavior of Thin Polymer Films | |
| https://doi.org/10.1016/j.electacta.2004.01.059 | Investigation of the barrier properties of silanes on cold rolled steel |
| https://doi.org/10.1016/j.electacta.2011.11.110 | Cut-edge corrosion study on painted aluminum rich metallic coated steel by scanning vibrating electrode and micro-potentiometric techniques |
| https://doi.org/10.1088/1757-899x/580/1/012007 | The ESRF dark-field x-ray microscope at ID06 |
| https://doi.org/10.1016/j.jallcom.2010.04.013 | Thermal stability and magnetic properties of FeCoBSiNb bulk metallic glasses |
| https://doi.org/10.1107/s1600576718017302 | Mapping of individual dislocations with dark-field X-ray microscopy |
| https://doi.org/10.1361/105994901770344719 | Kinetics of Strain Aging in Bake Hardening Ultra Low Carbon Steel - a Comparison with Low Carbon Steel |
| https://doi.org/10.1016/j.msea.2012.08.058 | Improved plasticity and corrosion behavior in Ti–Zr–Cu–Pd metallic glass with minor additions of Nb: An alloy composition intended for biomedical applications |
| https://doi.org/10.1002/srin.200100123 | Redistribution of the substitutional elements during σ and χ phase formation in a duplex stainless steel |
| https://doi.org/10.1007/s12289-012-1097-4 | Numerical and experimental study of the multi-axial quasi-static strength of clinched connections |
| https://doi.org/10.1016/s0890-6955(97)00113-2 | Assessment of steel surface roughness and waviness in relation with paint appearance |
| https://doi.org/10.1016/j.actamat.2019.05.021 | A multi-scale study of the interaction of Sn solutes with dislocations during static recovery in α-Fe |
| https://doi.org/10.1111/j.1574-6941.2002.tb00905.x | Occurrence of manganese-oxidizing microorganisms and manganese deposition during biofilm formation on stainless steel in a brackish surface water |
| https://doi.org/10.1364/oe.27.007120 | Multilayer Laue lenses at high X-ray energies: performance and applications |
| https://doi.org/10.3389/fmats.2015.00073 | A Multiple-Action Self-Healing Coating |
| https://doi.org/10.1117/12.281143 | <title>Advantages of using an oscillating laser beam for the production of tailored blanks</title> |
| https://doi.org/10.1107/s1600576718011378 | Reciprocal space mapping and strain scanning using X-ray diffraction microscopy |
| https://doi.org/10.1103/physrevb.83.184201 | Assessment of a low-cost protocol for anab initiobased prediction of the mixing enthalpy at elevated temperatures: The Fe-Mo system |
| https://doi.org/10.5006/1.3278407 | Three-Dimensional Boundary Element Method and Finite Element Method Simulations Applied to Stray Current Interference Problems. A Unique Coupling Mechanism That Takes the Best of Both Methods |
| https://doi.org/10.1016/j.fusengdes.2021.112935 | Irradiation hardening and ductility loss of Eurofer97 steel variants after neutron irradiation to ITER-TBM relevant conditions |
| https://doi.org/10.1590/0034-7612146562 | Motivação, satisfação profissional e evasão no serviço público: o caso da carreira de especialistas em Políticas Públicas e Gestão Governamental |
| https://doi.org/10.1080/1478422x.2020.1807163 | The influence of concretion on the long-term corrosion rate of steel shipwrecks in the Belgian North Sea |
| https://doi.org/10.1002/jrs.4672 | Comparison of multivariate linear regression methods in micro‐Raman spectrometric quantitative characterization |
| https://doi.org/10.1002/srin.200300200 | Microstructural Evolution and Crystallographic Texture Formation of Cold Rolled Austenitic Fe‐30Mn‐3Al‐3Si TWIP‐Steel |
| https://doi.org/10.1039/c8dt04292f | Combining MCR-ALS and EXAFS as tools for speciation of highly chlorinated chromium( |
| https://doi.org/10.1002/maco.201810210 | Corrosion protection of steel cut‐edges by hot‐dip galvanized Al(Zn,Mg) coatings in 1 wt% NaCl: Part II. Numerical simulations |
| https://doi.org/10.1021/acsomega.9b03330 | Molecular Characterization of Multiple Bonding Interactions at the Steel Oxide–Aminopropyl triethoxysilane Interface by ToF-SIMS |
| https://doi.org/10.1016/j.jnucmat.2020.152204 | Development of chromium and chromium-tungsten alloy for the plasma facing components: Application of vacuum arc melting techniques |
| https://doi.org/10.1007/s11340-021-00689-7 | Critical Evaluation of Spherical Indentation Stress-Strain Protocols for the Estimation of the Yield Strengths of Steels |
| https://doi.org/10.1016/j.surfcoat.2013.08.041 | Effect of surface composition and microstructure of aluminised steel on the formation of a titanium-based conversion layer |
| https://doi.org/10.1007/s10853-023-08472-w | Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels |
| https://doi.org/10.1016/j.nme.2022.101211 | Development of RAFM steels for high temperature applications guided by thermodynamic modelling |
| https://doi.org/10.1088/1741-4326/ac2523 | Fabrication routes for advanced first wall design alternatives |
| https://doi.org/10.1016/j.elecom.2013.04.023 | Anodic formation of self-organized Ti(Nb,Sn) oxide nanotube arrays with tuneable aspect ratio and size distribution |
| https://doi.org/10.1002/maco.201810209 | Corrosion protection of steel cut‐edges by hot‐dip galvanized Al(Zn,Mg) coatings in 1 wt% NaCl: Part I. Experimental study |
| https://doi.org/10.1016/j.jnucmat.2024.155176 | Impact of neutron irradiation on the tensile properties of advanced EUROFER97-type steels |
| https://doi.org/10.1515/ijmr-2002-0191 | Dilatometric study of the effect of soluble boron on the continuous and isothermal austenite decomposition in 0.15C–1.6Mn steel |
| https://doi.org/10.1007/s00170-021-08123-x | On the influence of zinc coating and outdoor exposure on the strength of adhesive, clinched, and hybrid joints of batch hot-dip galvanized steel |
| https://doi.org/10.1016/j.ijfatigue.2023.107851 | Fatigue weld crack detection using distributed fiber optic strain sensing |
| https://doi.org/10.1021/acs.jpcc.0c01523 | Molecular Characterization of Bonding Interactions at the Buried Steel Oxide–Aminopropyl Triethoxysilane Interface Accessed by Ar Cluster Sputtering |
| https://doi.org/10.1007/978-981-15-9893-7_14 | A Heat Transfer Finite Element Model for Wire-Arc-Additive-Manufacturing Process |
| https://doi.org/10.1149/1.2794461 | XPS-study of Cu/epoxy Interfaces after different Wet Chemical Treatments |
| https://doi.org/10.1016/j.jnucmat.2025.155611 | Development of irradiation- and high-temperature resistant steels for fusion applications: Belgian contribution |
| https://doi.org/10.1007/s40964-025-01055-y | Strategies for enhanced interfacial strength in IN718-LCS bi-metallic structure fabricated using wire arc additive manufacturing |
| https://doi.org/10.1016/s0304-4149(98)00083-0 | Almost Gibbsian versus weakly Gibbsian measures |
| https://doi.org/10.1016/s0924-0136(00)00890-6 | Statistical evaluation of the uncertainty of experimentally characterised forming limits of sheet steel |
| https://doi.org/10.1016/s1359-6462(97)00185-1 | Recrystallisation kinetics in IF-steel: A study on the sluggish recrystallisation behaviour |
| https://doi.org/10.1007/s11661-002-0175-5 | The influence of the stress state on the plasticity of transformation induced plasticity-aided steel |
| https://doi.org/10.1088/0965-0393/8/4/302 | The design of a biaxial tensile test and its use for the validation of crystallographic yield loci |
| https://doi.org/10.1016/j.electacta.2013.03.186 | Study of local Na+ and Cl− distributions during the cut-edge corrosion of aluminum rich metal-coated steel by scanning vibrating electrode and micro-potentiometric techniques |
| https://doi.org/10.1002/srin.200200215 | Improvement of weldability of TRIP steels by use of in‐situ pre‐ and post‐heat treatments |
| https://doi.org/10.1016/j.ultramic.2019.112813 | Atom probe of GaN/AlGaN heterostructures: The role of electric field, sample crystallography and laser excitation on quantification |
| https://doi.org/10.1002/srin.200506032 | Modelling Decarburization in Electrical Steels |
| https://doi.org/10.1039/c9gc00690g | Chromium( |
| https://doi.org/10.1039/d0cp02408b | The role of hydrogen bond donor and water content on the electrochemical reduction of Ni2+ from solvents – an experimental and modelling study |
| https://doi.org/10.1111/ffe.12625 | Experimental and numerical study on effect of forming process on low‐cycle fatigue behaviour of high‐strength steel |
| https://doi.org/10.1109/icelmach.2016.7732742 | Effects of cutting and annealing of amorphous materials for high speed permanent magnet machines |
| https://doi.org/10.1016/j.jnucmat.2021.153086 | Irradiation embrittlement in pure chromium and chromium-tungsten alloy in a view of their potential application for fusion plasma facing components |
| https://doi.org/10.1016/j.fusengdes.2021.112275 | Impact of materials technology on the breeding blanket design – Recent progress and case studies in materials technology |
| https://doi.org/10.1002/brb3.2377 | High prevalence of epilepsy in Northern Rwanda: Exploring gender differences |
| https://doi.org/10.1016/j.jallcom.2018.09.356 | A first-principles reassessment of the Fe-N phase diagram in the low-nitrogen limit |
| https://doi.org/10.1007/978-3-030-92563-5_39 | Life Cycle Sustainability Assessment of Repair Through Wire and Arc Additive Manufacturing |
| https://doi.org/10.1016/s0890-6955(01)00059-1 | Micro-hydrodynamic effects in EBT textured steel sheet |
| https://doi.org/10.1016/s0257-8972(01)01468-2 | PVD Al–Ti and Al–Mn coatings for high temperature corrosion protection of sheet steel |
| https://doi.org/10.1016/s0924-0136(98)00123-x | Biaxial tests on cruciform specimens for the validation of crystallographic yield loci |
| https://doi.org/10.1108/09526869810199629 | Attitude of laboratory personnel towards accreditation |
| https://doi.org/10.1016/0924-0136(94)01371-7 | Simulation of square-cup deep-drawing with different finite elements |
| https://doi.org/10.1016/0304-8853(94)90531-2 | Evaluation of the susceptibility of an electrical steel to magnetic aging using a new internal friction technique |
| https://doi.org/10.1111/epp.12111 | The voluntary |
| https://doi.org/10.1016/j.finel.2017.10.004 | Finite element simulation of the dynamic behaviour of deep drawn components with accurate thickness description |
| https://doi.org/10.1063/1.5142319 | Imaging microstructural dynamics and strain fields in electro-active materials in situ with dark field x-ray microscopy |
| https://doi.org/10.1016/j.jallcom.2020.156061 | Processing a Fe67Mo4.5Cr2.3Al2Si3C7P8.7B5.5 metallic glass: Experimental and computed TTT and CCT curves |
| https://doi.org/10.3390/met7040140 | Advanced Plasticity Modeling for Ultra-Low-Cycle-Fatigue Simulation of Steel Pipe |
| https://doi.org/10.1002/maco.201307145 | Scanning Kelvin force microscopy study at the cut-edge of aluminum rich metal coated steel |
| https://doi.org/10.1063/1.5141139 | Radiation furnace for synchrotron dark-field x-ray microscopy experiments |
| https://doi.org/10.1115/omae2015-41919 | Reeling Pipeline Material Characterization: Testing, Material Modeling and Offshore Measurement Validation |
| https://doi.org/10.1115/omae2019-96371 | Large-Scale Resonant Fatigue Testing of Welded Tubular X-Joints for Offshore Jacket Foundations |
| https://doi.org/10.1016/j.jnucmat.2023.154480 | TEM investigation of reduced activation ferritic/martensitic alloys developed by thermodynamic modeling |
| Exploratory database analysis via self-organization | |
| https://doi.org/10.1049/ip-smt:20010534 | Quality control of laser welds of tailoredblanks using guided waves and EMATs |
| https://doi.org/10.1088/0957-0233/13/2/401 | SCOUT - Surface Characterization Open-Source Universal Toolbox |
| https://doi.org/10.1002/srin.199605501 | The effect of coiling temperature and continuous annealing on the properties of bake hardenable IF steels |
| https://doi.org/10.1002/srin.200405849 | Properties of Laser Welded SAF 2205 Duplex Stainless Steel Sheet |
| https://doi.org/10.1007/s11270-007-9389-x | Evaluation of a Quasi-steady-state Respiration Test in a Full-scale Biopile |
| https://doi.org/10.1016/j.jmmm.2003.12.671 | Wide frequency complex permeability function for linear magnetic materials |
| https://doi.org/10.1149/1.3599062 | Effect of Carbon Modification of Particles on Their Incorporation Rate during Electrodeposition |
| https://doi.org/10.1002/srin.199701175 | The influence of nitrogen and orientation on the rolling deformation mechanisms of austenitic single crystals |